Elite Thermal offers a wide range of high-end accessories and consumables for a safe and efficient heat treatment process.
A wide range of tube diameters and lengths is available in various grades of ceramics, metal and quartz silica glass.
Types "UNIVERSAL" and "TRIPLE FLANGE" are available for use with gas atmosphere and vacuum applications. (water cooling options are available).
A wide variety of shapes and sizes are available in various grades of ceramics and metals.
With control valve for air or inert gases. For use with gas inlets and work tubes with gas tight end seals.
Solenoid valves are control units which, when electrically energized or de-energized, either shut off or allow fluid flow.
The actuator inside the a solenoid valve takes the form of an electromagnet. When energized, a magnetic field builds up which pulls a plunger or pivoted armature against the action of a spring.
A full safety system for use with Hydrogen.
Two system types are available providing timed purging and gas monitoring.
Chimney vents fumes from the chamber. Following are the Available chimney from elite.
Ceramic tube (From heater box to outer box)
Metal tube (Mounted on the outer box)
An independent digital temperature indicator is built into the furnace control panel and wired to a panel mounted thermocouple socket. (for use with an independent monitor thermocouple).
An independent thermocouple for use in conjunction with a digital temperature indicator
For use when a basic controller is fitted for automatic shutdown of the furnace/oven after pre-set time.
A digital 7day / 24 hour time switch for programmed switch on / off when using basic temperature controllers. A time switch may not be necessary if more sophisticated controllers are fitted.
A range of horizontal, vertical and universal stand options are available for bench and floor standing furnaces.
These are designed to reduce the heat loss from the tube ends and to improve the temperature uniformity.
They are helpful for vertical tubes. different insulation plugs are supplied for use with standard length work tubes.
For use up to 1150°C when controlled atmosphere conditions are required and to protect the furnace insulation & heating elements from chemical attack (it may be necessary to update the furnace power when this option is selected).
Hearth tiles provide protection for the furnace from spillage.
Removable hearth tiles are offered an extra cost.
They are available in variety of materials such as Silicon Carbide, Cordierite, Fibre Board, Alumina and Zirconia.
A broad range of shapes and sizes are available in various grades of ceramics and metals.